Huawei E220 Hsdpa Usb Modem Unlocking Tools For Vehicles

Posted on -
Huawei E220 HSDPAUSBmodem
  1. Huawei E220 Hsdpa Usb Modem Unlock Software
  2. Huawei E220 Hsdpa Usb Modem
  3. Huawei E220 Hsdpa Usb Modem Linux

Huawei E220 is a well known 3.6Mbps 3G USB modem by the Huawei Technologies, it provides 3.6Mbps on the HSDPA, or 384kbps on the UMTS, or 236.8kbps on the EDGE, or 85.6kbps on the GPRS. Earlier Vodafone were also providing e220 with their connection after that many service providers had starting providing.

The Huawei E220 is a HuaweiHSDPA access device (modem) manufactured by Huawei and notable for using the USB interface (USB modem).

Technically it is a modem, USB and (due to the CDfs format) virtual CD-ROM device.

Launched on 21 June 2006,[1] the device is used for wireless Internet access using 3.5G, 3G, or 2G mobile telephony networks. It supports UMTS (including HSDPA), EDGE, GPRS and GSM.

E220 works well with Linux, as support for it was added in Linux kernel 2.6.20 (2007-02-04[2]), but there are workarounds for distributions with older kernels.[3][4][5][6] The card is also supported by Vodafone Mobile Connect Card driver for Linux, and it is possible to monitor the signal strength through other Linux applications.[7]

Most 3G network operators bundle the device with a contract, with some operators simlocking[8] the device. Unlocked and unbranded modems can also be bought from independent suppliers.

  • 3Software

Features[edit]

The device contains not only the cellular antenna but also about 22 MB (10 MB on older versions) of storage memory accessible to the operating system as a USB mass storage device[9] formatted with CDfs, thus emulating a CD-ROM drive. In this memory, E220 devices supplied by mobile operators may contain 3G dialer software written by the operator, while Huawei-branded devices contain Huawei's original dialing software, which they call 'Dashboard'. Huawei's Dashboard and updates for it are also available from Huawei's website,[10] or the 11.313.02.00.01 firmware for 7.2 Mbit/s from NetCom (in reality 'flashing' this device means writing a firmware image to its internal flash memory, which is different from 'updating the dashboard', which is simply writing a new CDFS disc image to the USB mass storage device that appears in the operating system). Flashing the firmware of this device doesn't change the USB Mass Storage memory used for the operator's software, therefore connection settings (such as APN) will be retained. When the device is first attached, Windows will automatically run the software stored on it, unless that feature has been turned off in Windows. This feature can be bypassed by pressing the Shift key while attaching the device, or by turning off the autostart feature entirely. It is possible to remove the operator branding by flashing the device with Huawei's Mobile Partner software.Huawei does not publicly release firmware updates for its devices, only Dashboard updates. The standard way of obtaining firmware updates is through the service provider, however some firmware updates are publicly available over the Internet and some users have cross-flashed (i.e. using a firmware provided by service provider 'X' with modem supplied by service provider 'Y') their modems without trouble.Updating the modem's Dashboard does not remove or affect the network-lock (that may be in effect with modems purchased subsidized from a service provider) that prevents you from using the modem with any service provider. However updating the modem's firmware may remove this network-unlock or even the opposite, turn a network-unlock free modem into an unlocked one.

Hardware[edit]

The E220 connects to the computer with a standard Mini USB cable. The device comes with two cables, one short and one long. The long one has two USB A interfaces, one used for data and power and the other optionally only for assistance power in case the computer is not able to provide the full 500 mA (milliamperes) required for the device to work from one USB interface only.If the connection is frequently disrupted or is unstable (or usable at slow speeds only), the two plug USB cable should be used instead.

The E220 antenna is internal; the USB cable does not act as an antenna. The external antenna connector is not accessible without opening the device (voiding any warranty). It is still possible to connect an external antenna without opening the device and using the (internal) external antenna connector. Together with a high gain antenna like an LPDA or an OMNI booster antenna and an adapter, signal strength can be considerably improved.There is also a way to do this, open the modem, remove the small internal antenna, and solder a UMTS-antenna cable onto the board. The warranty will be invalidated, but it can be a cheap and functional way to connect an external antenna.[11]

Huawei e220 hsdpa usb modem linux

Software[edit]

Huawei
Vodafone 3GUSBmodem

The Huawei E220 includes its own Windows software in its internal memory, which self-installs through the Windows's auto-start feature and can be flashed (overwritten) by the end user. The standard software by Huawei is called Mobile Partner and is indicated by the code UTPS.

Some network operators selling the E220, however, replace Huawei's software with their own, which often is software-locked (albeit not SIM-locked) to work only with the operator's own network. End-users can use also third-party open source software PyHumod or freeware MWconn.

Since the release of Windows 7 users have reported a number of issues that require a firmware upgrade to the modem. Huawei have released new firmware to the operators, who have generally made it available on their websites. The firmware upgrade must be carried out from a machine running Windows XP or Windows Vista and which can see the modem. Once this is complete Windows 7 can see and use the modem.

The following operator(s) are known to replace Huawei's software with their own:

  • BASE eplus (Germany),
  • BT Business (UK),
  • Claro (Americas),
  • Dialog Axiata (Sri Lanka),
  • Drei (Austria),
  • Metfone (Cambodia),
  • MTS (Russia),
  • Mobilkom Austria (Austria) - uses software from Austrian software vendor mquadr.at[12] for both its brands A1 and Bob.
  • Mobily (Saudi Arabia),
  • Movistar (Spain, Argentina),
  • MTC (Namibia),
  • MTN (Uganda),
  • MTN SA (South Africa),
  • mt:s (Serbia),
  • Multilinks TeleKoms (Nigeria),
  • Nawras (Oman),
  • Optimus Telecomunicações (Portugal),
  • Orange Austria,
  • Orange Belgium,
  • Play Mobile (Poland),
  • Safaricom (Kenya),
  • Sun Cellular (Philippines),
  • Swisscom (Switzerland),
  • Telkomsel & Axis (Indonesia) (but not sim-locked),
  • Three (Australia, Austria, Italy, UK, Sweden),
  • T-Mobile Austria,
  • Turkcell (Turkey),
  • Visafone (Nigeria),
  • VIVA (Kuwait),
  • Vodacom SA (South Africa),
  • Vodafone - Vodafone puts on its E220 (Vodafone Mobile Connect USB Modem) its Windows Vodafone Mobile Connect Lite software, which is a lighter version of Vodafone Mobile Connect. In Windows it uses the executable VodafoneUSBPP.exe. This device is also supported in Linux, using Vodafone Mobile Connect Card driver for Linux, which can be downloaded from Vodafone Betavine. - Vodafone in New Zealand markets the Huawei D220 as the Vodem. - Vodafone in Fiji markets the Huawei Modem as the Flashnet.[13]
  • WIND Greece,
  • Zain (Nigeria),
  • Zain (Sudan).

Operating systems[edit]

  • Microsoft Windows XP, Vista and 7
  • Mac OS X v10.2.6 Jaguar or higher
  • Linux 2.6.20 or higher. One can use wvdial or NetworkManager with this modem in Linux.
    • Debian GNU/Linux, Ubuntu[14][15] and gnuLinEx
    • Ark Linux
    • Caixa Mágica
  • AROS Poseidon stack

Similar modems[edit]

  • HSDPA:
    • VigSys VM10
    • Huawei E160 (E160E, E160G, E160X, K3565)
    • Huawei E169
  • HSUPA:
    • Novatel Ovation MC950D
    • Huawei E270

See also[edit]

Tools
  • Mobile Broadband Configuration Assistant (MBCA) for NetworkManager.

References[edit]

  1. ^Huawei TerminalArchived 2009-02-06 at the Wayback Machine
  2. ^kerneltrap.org - Linux: 2.6.20 Kernel Released
  3. ^Huawei E220 HSDPA USB 3G Modem in Linux
  4. ^Huawei E220 working on Linux!!! : Java Addict
  5. ^Kernel.orgArchived 2011-07-21 at the Wayback Machine
  6. ^Huawei E220 working on Ubuntu!!!
  7. ^Huawei E620 - pppd dies after disconnecting monitor on /dev/ttyUSB2 [Archive] - ADSL & Broadband Forums - Internet, Gaming, Hardware, Software
  8. ^Vodafone Huawei E220 USB Modem - first impressions - Page 4 - ADSL & Broadband Forums - Internet, Gaming, Hardware, Software
  9. ^Using Huawei E220 with Debian/LinuxArchived 2007-10-09 at the Wayback Machine
  10. ^Huawei Terminal
  11. ^GNIZA.org
  12. ^Mquadr.at
  13. ^Saarinen, Juha (2007-01-29). 'Vodafone Vodem'. New Zealand PC World. Retrieved 2010-07-22. [...] the Vodem is actually a rebranded Huawei E220 put together in China
  14. ^help.ubuntu.com Huawei E220
  15. ^Huawei E220

External links[edit]

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Huawei_E220&oldid=853697950'

I have a Huawei E303 modem given by a Mobile Broadband Service Provider. I did Pay for it.

I had terminated the service from that service provider. But I cannot use that modem which I did pay to gain because it has been Locked !

Is there an Application in Ubuntu for getting Unlock it ?

Is this having a legal issue ? (If so I will remove this question)

I followed certain guides on certain sites but could not fix this.

Here is the lsusb output. Last one is the particular modem :

user224082

3 Answers

try Linux Huawei Unlocker

Linux Huawei Unlocker is a tool that attempts to automatically remove the carrier lock on Huawei mobile broadband modems from the Linux command line. It automatically finds IMEIs, calculates unlock codes, checks SIM lock status, displays remaining unlock attempts, and asks the user for confirmation before trying the unlock code.

Prasad RDPrasad RD

First install the Mobile partner Linux software. You can download the installation file from here.

Go to the file folder through terminal. Then enter:

Connect the dongle with a 'Foreign' SIM.

Then there will be a message to enter the Unlock Code.

Then visit the huaweicodecalculator.com and get the unlock code with entering the IMEI number of your Dongle.

** For Huawei E303 you need to get the Unlock Code with New Algorithum.

Then copy the Unlock Code and Paste it on the Mobile Partner message box and Press Unlock.

This will unock the Dongle.

user224082

Huawei E220 Hsdpa Usb Modem Unlock Software

here is the site, which describes how to unlock usb modem in linux:

Huawei E220 Hsdpa Usb Modem

and he also lists this site for getting the unlock code(v1, v2, v3) and flash codes.

Huawei E220 Hsdpa Usb Modem Linux

RashiRashi